Home ProductsOxygen Compressor

HANG ZHOU TAI LIAN CRYOGENIC EQUIPMENT CO., LTD.

2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar

    • 2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar
    • 2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar
    • 2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar
    • 2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar
  • 2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar

    Product Details:

    Place of Origin: Hangzhou,China
    Brand Name: Tailian
    Certification: ISO,CE
    Model Number: TL-2500

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 pc
    Price: negotiation
    Packaging Details: wooden case
    Delivery Time: 6 month after payment
    Payment Terms: L/C, T/T
    Supply Ability: 10 pcs per month
    Contact Now
    Detailed Product Description
    Flow: 2500nm3/h Type: Reciprocating
    Inlet Pressure: 0.1 Bar Outlet Pressure: 5 Bar
    Inlet Tempt.: 35℃ Speed: 593r/min
    Motor: 250kw Voltage: 380V

     

    2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar

     

    1.description

     

    A reciprocating compressor or piston compressor is a positive-displacement compressor that uses pistonsdriven by a crankshaft to deliver gases at high pressure.The intake gas enters the suction manifold, then flows into the compression cylinder where it gets compressed by a piston driven in a reciprocating motion via a crankshaft, and is then discharged. Applications include oil refineries, gas pipelines, chemical plants, natural gas processing plants and refrigeration plants. One specialty application is the blowing of plastic bottles made of polyethylene terephthalate (PET).

    In the ionic liquid piston compressor many seals and bearings were removed in the design as the ionic liquid does not mix with the gas. Service life is about 10 times longer than a regular diaphragm compressor with reduced maintenance during use, energy costs are reduced by as much as 20%. The heat exchangers that are used in a normal piston compressor are removed as the heat is removed in the cylinder itself where it is generated. Almost 100% of the energy going into the process is being used with little energy wasted as reject heat.

     

    2.use

     

    Reciprocating compressors use pistons driven by a crankshaft. They can be either stationary or portable, can be single or multi-staged, and can be driven by electric motors or internal combustion engines.Small reciprocating compressors from 5 to 30 horsepower (hp) are commonly seen in automotive applications and are typically for intermittent duty. Larger reciprocating compressors well over 1,000 hp (750 kW) are commonly found in large industrial and petroleum applications. Discharge pressures can range from low pressure to very high pressure (>18000 psi or 180 MPa). In certain applications, such as air compression, multi-stage double-acting compressors are said to be the most efficient compressors available, and are typically larger, and more costly than comparable rotary units. Another type of reciprocating compressor, usually employed in automotive cabin air conditioningsystems,is the swash plate compressor, which uses pistons moved by a swash plate mounted on a shaft (see axial piston pump).

    Household, home workshop, and smaller job site compressors are typically reciprocating compressors 1½ hp or less with an attached receiver tank.

     

     

    3.application

     

    Gas compressors are used in various applications where either higher pressures or lower volumes of gas are needed:

     

    condition new
    flow 2500nm3/h
    inlet pressure 0.1 bar
    outlet pressure 5 bar
    inlet tempt. 35℃
    components O2 93% Ar 5% N2 2%
    structure vertical two-column secondary compression
    speed 593r/min

     

    2500nm3 / H Reciprocating Oil Free O2 Compressor Discharge Pressure 5 Bar

    Contact Details
    HANG ZHOU TAI LIAN CRYOGENIC EQUIPMENT CO., LTD.

    Contact Person: Mr. Yao junming

    Send your inquiry directly to us (0 / 3000)

    Other Products