Place of Origin: | China |
Brand Name: | Tai Lian |
Certification: | GB-150, CE,ASME, ISO9001,TUV |
Model Number: | KDON-550/1000 |
Minimum Order Quantity: | 1set |
---|---|
Price: | negotiation |
Packaging Details: | Packed in standard export packing |
Delivery Time: | 60working days after received your payment |
Payment Terms: | T/T or L/C |
Supply Ability: | 100sets month |
Product Name: | Oxygen Plant | Application: | Separate Oxygen From Air |
---|---|---|---|
Oxygen Output: | 550 +-5% Cube Meter Per Hour | Feature: | Long Service Life Low Energy Consumption |
Standard: | ISO9001;2008 CE Cetificate | Purity: | 99.6% |
CO2: | <350ppm | SO2: | 《0.44mg/m3 |
99.6% Air Separation Plant FON 550/1000 Industrial Oxygen Plant With Low Energy Consumption
Technical Part.
Annex . 1 Basic Design Condition
1.1 Atmosphere Design Condition
Atmosphere pressure 101.3kPa(A)
Atmosphere temperature 30℃
Relative humidity 75%
Atmosphere oxygen content 20.95%O2
1.2 Atmosphere temperature
Annual average temperature 18.4℃
Extreme maximum temperature 40℃
Extreme minimum temperature -1.8℃
Summer average temperature 30℃
Winter average temperature 7.5℃
1.3 Seismic force: <6 Mercalli Scale
1.4 Altitude: 50m
1.5 Air composition at the end-user’s site:
CO2 ≤350 ppm
SO2 ≤0.44 mg/m3
H2S ≤2.3 mg/m3
CH4 ≤5.2mg/m3
C2H2 ≤0.03 ppm
CnHm(except C2H2) ≤5ppm
Dust content ≤10mg/m3
1.6 Circulating water
Inlet water temperature 30℃
Inlet/outlet water pressure 0.4 MPa(G)
Max temperature rise 0.2 MPa(G)
Maximum temperature rise 10℃
Cooling water turbidity 12 mg/L
PH 7.2
Total hardness 2.5
Fouling factor 0.0004 m2 hºC/ k.W
Water consumption ~33T/h(without oxygen compressor)
1.7 Electricity supply
LV 380V/220V±5%AC three-phase four-wire system
Frequency 50±0.5Hz
Loaded power ~450KW(name card rate,not incl. O2 compressor)
Annex. 2. Main technical parameter
2.1 production capacity, purity and pressure
Oxygen production 550m3/h±5%
Oxygen purity ≥99.6%O2
Oxygen pressure ~0.034MPa(G)
Nitrogen production 1000m3/h±5%
Nitrogen purity ≤10ppmO2
Nitrogen pressure ~0.012 MPa(G)
Production capacity(under condition of 0℃,101.325Kpa)
2.2 start pressure 0.65MPa(G)
2.3 plant working period 12 months
2.4 start period ~24 hours
2.5 unit power consumption ~0.6kWh/m3O2(without oxygen compressor)
Annex.3 . process
Type KDON-550/1000 Air separation plant adopts full low pressure flow, the technology process:
Raw air from atmosphere enters air filter for removal of dust and other mechanical impurity and goes to non-lub air compressor. After two stage compression to approx 0.65MPa(G) it goes to precooling unit to be cooled to 5~10℃,then goes to switch over MS purification system for absorbing of moisture, CO2 and CnHm. MS absorber purifier consists of MS vessels . While one MS absorber is working, the other is regenerated by waste nitrogen via heater to regenerate the MS.
After purified, a small part of air is used as bearing gas for gas bearing expansion turbine. The rest enters cold box in which it is cooled in main heat exchanger by reflux(pure oxygen, pure nitrogen, waste nitrogen, etc. ) . Part of air is sucked from the middle of main heat exchanger to expansion turbine. Most of it after expansion via sub-cooler after cooled by oxygen in upper column is delivered to upper column. Small part goes to waste nitrogen channel via reheated out of the cold box. The rest continues to be cooled down in main heat exchanger to near liquefied air tempt. to lower column.
In lower column , air is preliminary separated to nitrogen and oxygen enriched air. In condenser-evaporator, nitrogen is condensed while liquid oxygen is evaporated at the lower pressure side. Part of liquid nitrogen is used as reflux for lower column while the other part is abstracted from top of lower column via liquid air, liquid nitrogen sub-cooler is subcooled by pure nitrogen an waste nitrogen and throttled to be delivered to middle part of upper column as reflux.
Product oxygen is abstracted from lower part of upper column and is delivered out of the cold box via expanded air sub-cooler, main heat exchanger to be reheated. Part is used as regenerated gas for MS purifier. Pure nitrogen is abstracted from top of upper column. Via liquid air liquid nitrogen sub-cooler and main heat exchanger it is reheated and delivered out of cold box.
Oxygen from distillation column is compressed by O2 compressors to regulated pressure to customer.
4,scope of supply of machinery
4.1,Air compressor(Piston type oil free compresoor) 3 sets(Liu Er Kong)
Model VW-22/6.5
Discharge capacity 22m3/min
Discharge pressure 0.65MPa(G)
Motor power 120kW
Cooling water consumption ~5t/h
Cooling water temp. ≤30℃
Cooling water pressure ≥0.3MPa
scope of supply:
4.1.1 Main motor 3 sets
4.1.2 Compressor body 3 sets
4.1.3 Electrical control panel 3 sets
4.1.4 Spare parts 3 sets
4.1.5 End stage cooler 3 sets
4.2,Air balance tank 1 set(3 inlets, 1 outlet)
Volume 5m3
Working pressure 0.8MPa
4.3,Air precooling unit 1 set(Jialian)
Model GAYL-3960/8
Air processing capacity 3960m3/h
Inlet pressure ≤0.8MPa(G)
Air inlet tempt. ≤40℃
Air outlet tempt. ~8℃
Motor power ~19kW
Circular water pressure ≥0.3MPa
Circular water inlet temp. ≤30℃
Circular water capacity ~18t/h
Scope of supply:
4.3.1 Imported refrigeration compressor 1 set
4.3.2 Condenser 1 set
4.3.3 Evaporator 1 set
4.3.4 Pipes, valves 1 set
4.3.5 Refrigerating auto-control element 1 set
4.3.6 Electric control board 1 set
4.3.7 Operation instrument panel 1 set
4.3.8 Water separator 1 set
4.3.9 Liquid level drainer 1 set
Note:All above is designed as one block.
4.4,MS purification system 1set
Model HXK-3960/8
Process air 3960m3/h
Working pressure 0.8MPa
Air tempt. to purification absorber 12℃
Absorbing time 8h
Regeneration gas tempt. to absorber 250℃
Regeneration gas tempt. out of absorber 100℃
Heater power 60kW
Scope of supply:
4.4.1 MS absorbing drum(including M.S.) 2sets
4.4.2 Heater 1set
4.4.3 Filter 1set
4.4.4 Valves 1set
Model FON-550/1000
Type 2 stages rectification
Process air 3600m3/h
O2 capacity 550m3/h±5%
O2 purity ≥99.6%O2
N2 capacity 1000m3/h±5%
N2 purity ≤10PPm O2
Dim. 2600×3000×22000mm
Scope of supply
4.5.1 Main heat exchanger 1pc
4.5.2 Subcooler 2ps
4.5.3 Condenser-evaporator 1set
4.5.4 Rectification column 1 set
4.5.5 Cold box 1set
4.6,Expansion turbine 1 pair 2 sets(Jiangyang)
Model PLPK-10.6/5.7-0.47
Flow 636m3/h
Inlet tempt. 130K
Inlet/outlet pressure ~0.67MPa(A)/0.147MPa(A)
Working medium Air
Air Braking method Fan braking
Insulation ≥78%
Scope of supply:
4.6.1 Expander machine body 2PCS
4.6.2 Expansion joint 4 PCS
4.6.3 Inlet filter 2 PCS
Note:All above is designed as one block.
CO2 | <350ppm |
SO2 | <0.44mg/m3 |
H2S | <2.3mg/m3 |
CH4 | <5.2mg/m3 |
C2H2 | <0.03ppm |
Dust content | <10mg/m3 |
PH | 7.2 |
Total hardness | 2.5 |
KDON - 550/1000 oxygen plant